Four collector systems.
One built for your pool.
Every pool is different; your solar system should be too. Answer one question below and we’ll point you straight to yours.
Let’s narrow it down.
Which best describes your project?
Our four collector systems.
Different technologies. Different strengths. One system built for your pool.
For homeowners who want proven performance, straightforward DIY installation, and the strongest balance of price, durability, and heat output. Made in the USA, with many systems still performing after 15–20 years in the field.
- Mild to moderate climates
- Standard asphalt roofs
- DIY installation
- Long-term value
When freeze resistance, tile roofs, and maximum durability matter more than anything else. Thick separated tubes add a wide margin against freeze damage, wind passes through instead of lifting, and minimal roof penetrations keep the mounting clean, with an industry-leading warranty behind it all.
- Freeze-prone climates
- Tile roofs
- High wind
- Long-term installations
The same separated-tube durability as SwimJoy, with dramatically simpler panel connections: the twist-together joint is built into the panel itself, no clamp assemblies or coupling hoses. A modular system of narrow panels in multiple lengths, easier to handle, and flexible across complex rooflines, obstructions, and pitch changes.
- Complex rooflines: narrow panels in multiple lengths
- Contractors & larger systems
- Harsh climates & tile roofs
- A premium install experience
Our most advanced collector, for homeowners who need the most heat from the least roof space. A multilayered nano-graphitic composite that’s 40%* more efficient: more heating from significantly less coverage.
- Small or obstructed roofs
- Highest efficiency
- Premium projects
- Maximum output
Solar Collector
Engineered to deliver more heat from less roof space. Our advanced multilayer graphitic composite maximizes energy absorption, accelerates heat transfer, and increases water flow, for performance you can feel.
The details, side by side.
| SwimEasySolid-Body | SwimJoySeparated Tube | SunLink ProSeparated Tube | NanoEdgeNano Graphitic Composite | |
|---|---|---|---|---|
| Strongest in | Mild winters, moderate wind | Freeze-prone, high-wind climates | Freeze-prone, high-wind climates | Limited roofs, maximum-output projects |
| In wind | Solid body retains heat | Wind passes through the panel | Wind passes through the panel | Low-profile strips lie flat to the roof |
| In freeze | Winterize with care: thinner tubes | Thick tubes add extra margin: winterize like any system | Thick tubes add extra margin: winterize like any system | Winterize like any system |
| Tile roofs | Not recommended | Well suited: minimal penetrations | Well suited: minimal penetrations | Adhesive mount: ask us about your roof |
| Panel format | Multiple standard sizes | Multiple standard sizes | Narrow panels in multiple lengths: flex across complex rooflines | Flexible strip format |
| Panel connection | Coupling hoses: the industry standard | Clamp assembly with zero-gap fit | Twist-together, built into the panel | Fast ring-clamp connections |
| Install effort | Easiest DIY install | Longer install: clamp assemblies | Fast connections; standard mounting | Most involved: strips glue down |
| Price tier | $$$ | $$$ | $$$ | $$$ |
| Choose it for | Best value: proven American-made balance of output, durability, and price | Toughest conditions: exceptional durability, industry-leading warranty | Smarter install: the simplest panel-to-panel connection there is | Highest performance: 40%* more efficient, least roof space required |
*Manufacturer-tested comparisons versus standard solar collectors. Solar heating performance depends on climate, sun exposure, and installation; treat all figures as close estimates rather than guarantees. Every system must be winterized when temperatures approach 40°F.
Your panels make the heat; a GeoBubble cover keeps it. Most of a pool’s warmth escapes right at the surface, the same reason solar is sized to surface area. Pair your collector system with a GeoBubble cover and lock in the heat your panels capture, day after day.
“Without a cover, the water will be around 86–88 degrees during the day. If we add the pool cover at night… I don’t know what the limit is, last year we stopped testing after the water reached 95 degrees.”
Verified customerStill not sure? We’ll design your system. FREE
Tell us about your pool, roof, and climate, and our solar experts will map your exact system: panel count, brand recommendation, layout, and everything to add to your cart. No cost, no obligation.
(619) 312-4822 · Mon–Fri, 9AM–5PM PST